HOME :: Tutorial Team Forum :: Submit :: RCT2.com :: Links :: Contact
Architecture
  .: Basic Southwest Archy
  .: Layering
  .: Restaurants (by      ZeRoSkIlL)

Coasters
  .: Compact Inverted      Coaster

Hacking
  .: 1st Gen. Intamin Drop
  .: 1st Gen. Intamin 2
  .: Skycoaster
  .: Giant Frisbee
  .: Deja Vu
  .: Invisible Entry/Exit
  .: Free Roaming Dirt
     Bikes (by Levis)

  .: Parking Lot (by Levis)
  .: Transfer Tracks

Progressive
  .: How This Works
  .: Parkmaking
  .: Hotels
  .: Coasters
  .: Entrances

Scenery
  .: 1 Tile Non Animated
  .: Footpaths (including      diagonal footpaths)

Miscellaneous
  .: Using The Forums
     (by ZeRoSkIlL)

  .: Custom Ride Music
  .: RCT2 Guide (by Jazz)
  .: General Questions
  .: Making Videos
 

1st Generation Intamin Drop Ride (Option 2)
by DeDevil
Link to Topic

Get 8cars trainer unless you know how to use another trainer well. Ill be using 8cars.
To make this work use any Steel Twister track. Make sure you have the vertical coaster in whatever workbench your using


1. Start with one station piece then behind it use a flat strait piece or two then make the flat to 70 degrees piece. On the front make a couple of strait pieces and then make a slant upward.

2. Now make the top. It should be 20ft or the hack might not work. Just flatten out the top of the small slant and build backwards so it flat. The brakes will go here. The track must be going the way of the arrow of it won’t work.


3. Time to zero clearances. Do all the options in the pictures.


4. Now with zero clearances on click on the end and put a small slant then a larger slant then vertical. The vertical piece must meet the already built vertical spike. Only the vertical pieces should touch. Otherwise it might disappear. You should have something like this with zero clearances still on.

5. Restore clearances and line up the other end so that if the bottom kept going up it would merge in to the top. Also make the top part have a slant. Once its all lined up zero clearances and continue going up from the bottom so the top and bottom meet and then go one more piece up.


6. Restore clearances. This is how I test it without switching modes. Right click the station and press the arrows going backwards. Once you get to the top press the other the other arrows so it goes back down. It should go onto where the brakes will be. If not you did the hack wrong. Go back to step 4. Keep pressing forward until you’re at the other end then press backward until you made it back to the station. If you did make it with no problems continue.

7. Time to do the last hacking. Change all the properties for the ride in edit ride stats so they meet the ones in the picture.

8. Put the entrance and exits and test. The put brakes on the top flat track so that it slows down the way you want and doesn’t fly off the track. Then your done.